ar71xx: fix link speed between AR7242 and AR8327 on the RB750GL/RB751G boards

The default pll_1000 value had to be changed
in order to make it working.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33993 3c298f89-4303-0410-b956-a3cf2f4a3e73

diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-rb750.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-rb750.c
index bee8bdf..71d4867 100644 (file)
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-rb750.c
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-rb750.c
@@ -186,7 +186,7 @@ static struct ar8327_platform_data rb750gr3_ar8327_data = {
        .pad0_cfg = &rb750gr3_ar8327_pad0_cfg,
        .cpuport_cfg = {
                .force_link = 1,
-               .speed = AR8327_PORT_SPEED_100,
+               .speed = AR8327_PORT_SPEED_1000,
                .duplex = 1,
                .txpause = 1,
                .rxpause = 1,
@@ -261,6 +261,7 @@ static void __init rb750gr3_setup(void)
        ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0);
        ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
        ath79_eth0_data.phy_mask = BIT(0);
+       ath79_eth0_pll_data.pll_1000 = 0x62000000;
 
        ath79_register_eth(0);