From: juhosg Date: Sun, 4 Nov 2012 22:09:57 +0000 (+0000) Subject: AA: ar71xx: don't use the unknown LED on the ZCN-1523-5 board X-Git-Url: http://207.154.207.93/?a=commitdiff_plain;h=0dba38b1110b1994cfe088a210aad083753fd001;p=12.09%2Fopenwrt.git AA: ar71xx: don't use the unknown LED on the ZCN-1523-5 board Backport of r34076. According to #12421, GPIO 1 controls the power output on the unused lines of the LAN2 port. Remove the LED definition in order to prevent possible permanent hardware damage. If someone needs that, the power-out feature can be controlled via the GPIO sysfs interface. Signed-off-by: Gabor Juhos git-svn-id: svn://svn.openwrt.org/openwrt/branches/attitude_adjustment@34077 3c298f89-4303-0410-b956-a3cf2f4a3e73 --- diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-zcn-1523h.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-zcn-1523h.c index 3a6fe21..bc79ab9 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-zcn-1523h.c +++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-zcn-1523h.c @@ -27,7 +27,7 @@ #define ZCN_1523H_2_GPIO_LED_MEDIUM 14 #define ZCN_1523H_2_GPIO_LED_STRONG 15 -#define ZCN_1523H_5_GPIO_LED_UNKNOWN 1 +#define ZCN_1523H_5_GPIO_LAN2_POWER 1 #define ZCN_1523H_5_GPIO_LED_LAN2 13 #define ZCN_1523H_5_GPIO_LED_WEAK 14 #define ZCN_1523H_5_GPIO_LED_MEDIUM 15 @@ -92,9 +92,6 @@ static struct gpio_led zcn_1523h_5_leds_gpio[] __initdata = { .name = "zcn-1523h:green:lan2", .gpio = ZCN_1523H_5_GPIO_LED_LAN2, .active_low = 1, - }, { - .name = "zcn-1523h:amber:unknown", - .gpio = ZCN_1523H_5_GPIO_LED_UNKNOWN, } };