From: Rafał Miłecki Date: Wed, 13 May 2015 13:11:04 +0000 (+0000) Subject: bcm53xx: fix default network interface on Netgear R8000 X-Git-Url: http://207.154.207.93/?a=commitdiff_plain;h=8d69ae09fc903ae9d0004b29879d1cda2f012536;p=15.05%2Fopenwrt.git bcm53xx: fix default network interface on Netgear R8000 It has 3 Ethernet interfaces, each of them connected to separated switch port. Default NVRAM uses switch port 8 as CPU which is connected to the 3rd interface (eth2). Signed-off-by: Rafał Miłecki git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45681 3c298f89-4303-0410-b956-a3cf2f4a3e73 --- diff --git a/target/linux/bcm53xx/base-files/etc/board.d/02_network b/target/linux/bcm53xx/base-files/etc/board.d/02_network index 644d3d9bb9..4263615e83 100755 --- a/target/linux/bcm53xx/base-files/etc/board.d/02_network +++ b/target/linux/bcm53xx/base-files/etc/board.d/02_network @@ -7,9 +7,18 @@ board_config_update -ucidef_set_interface_loopback +board=$(cat /proc/device-tree/compatible | tr '\0' '\t' | cut -f 1) +case "$board" in +netgear,r8000) + ifname=eth2 + ;; +*) + ifname=eth0 + ;; +esac -ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2" +ucidef_set_interface_loopback +ucidef_set_interfaces_lan_wan "$ifname.1" "$ifname.2" ucidef_add_switch "switch0" "1" "1" # NVRAM entries may contain unsorted ports, e.g. Netgear R6250 uses