From: mirko <mirko@3c298f89-4303-0410-b956-a3cf2f4a3e73>
Date: Sat, 21 Apr 2012 08:07:21 +0000 (+0000)
Subject: [target/linux/lantiq] change /etc/config/network according to actual VLAN config... 
X-Git-Url: http://207.154.207.93/?a=commitdiff_plain;h=d2aa64852ce4a8292bbe4506d2029645ab7392e9;p=openwrt.git

[target/linux/lantiq] change /etc/config/network according to actual VLAN config to enable LAN port 4 on the ARV4520PW board

The VLAN mapping on the ARV4520PW board is the following:

port on Router: | VLAN in software:
LAN 1           | 3
LAN 2           | 2
LAN 3           | 1
LAN 4           | 0
DSL             | 4

So LAN4 is not VLAN4 but VLAN0 (VLAN4 is DSL port) -> set "3 2 1 0 5t" as default switch config.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31391 3c298f89-4303-0410-b956-a3cf2f4a3e73
---

diff --git a/target/linux/lantiq/base-files/etc/uci-defaults/network b/target/linux/lantiq/base-files/etc/uci-defaults/network
index 94dea9a24e..8ea0798295 100755
--- a/target/linux/lantiq/base-files/etc/uci-defaults/network
+++ b/target/linux/lantiq/base-files/etc/uci-defaults/network
@@ -56,7 +56,7 @@ case "$board" in
 ARV4520PW|GIGASX76X)
 	ucidef_set_interface_lan "eth0.1"
 	ucidef_add_switch "eth0" "1" "1"
-	ucidef_add_switch_vlan "eth0" "1" "1 2 3 4 5t"
+	ucidef_add_switch_vlan "eth0" "1" "3 2 1 0 5t"
 	set_adsl "b" "b2p"
 	;;